• Sumit Arora
• Er. Aman Bathla
• Er. Awais Nazir Malik

Pavement is a durable coating laid in the targeted area to support vehicles or pedestrians. In the past, widespread use of cobblestones and granite was made, but now these surfaces are mostly replaced by asphalt or concrete. Road surfaces are regularly marked to guide vehicular traffic. Fillers modify the properties, accelerate the performance, and offer greater durability to composites, polymers, rubber, adhesives, coatings and building materials (such as concrete and asphalt). Fillers are used to reduce the cost of materials, increase the stiffness and provide special features to a material (such as colour or fireproof). The effects of fillers are therefore crucial Typical fillers are fine powders having particle size less than 75μm. Fillers can be naturally occurring like calcium carbonate, manufactured or derived from industrial waste such as fly ash from power plant. Other conventional fillers include silica, kaolin, mica, and silica materials. Fillers modify the system in two ways. Firstly, the manner in which shape, particle size and the size distribution of the particles of the filler affect the system by filling the liquid with solid particles. In this study, three varying Percentages of fillers namely Marble dust and Stone Dust (3.5%, 4.5% and 5.5% by weight of total aggregates) in both types of mixes were used along with three varying contents of bitumen (4%, 4.3% and 4.6%).

Marble Dust, Road Development, Flow value, Marshall Stability.

"AN EXPERIMENTAL STUDY OF UTILIZATION OF MARBLE DUST ON PAVEMENT ASPHALTIC CONCRETE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.523-532, June 2019, Available :http://www.jetir.org/papers/JETIR1906P76.pdf

"AN EXPERIMENTAL STUDY OF UTILIZATION OF MARBLE DUST ON PAVEMENT ASPHALTIC CONCRETE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp523-532, June 2019, Available at : http://www.jetir.org/papers/JETIR1906P76.pdf