• RONALD REAGON R
• KULDEEP JANGIR
• NITIN HOODA
• UTKARSH
• VIVEK KHANDELWAL

Lubrication is the property to reduce the friction in the engine components by applying a lubricant such as oil to minimize the friction and provide smooth movement to the engine components. During our investigation , the properties of the lubrication oil is being observed with the change in temperature of the engine box and the bearings used in the turbine engine. For the analysis of the lubrication oil we are using the LMS AMESim software. It is a simulation software which gives us a virtual platform to construct and modify the different types of system and test under the different condition. The results will be validated with the experimental data and the change in the properties of the lubricating oil will seen. If the analytical results match with experimental results then the system can be used for the incorporation of new components in the model, prepared in the software, this will lead to the reduction in the cost of testing and also the time involved in the testing.

"FLOW ANALYSIS OF LUBE SYSTEM OF GAS TURBINE ENGINE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.987-999, June 2019, Available :http://www.jetir.org/papers/JETIR1906R36.pdf

"FLOW ANALYSIS OF LUBE SYSTEM OF GAS TURBINE ENGINE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp987-999, June 2019, Available at : http://www.jetir.org/papers/JETIR1906R36.pdf