• Ravi Kant Pandey
• Ramesh Mishra

The use of Multiple-Input Multiple-Output (MIMO) techniques has revolutionized wireless communications systems with potential gains in capacity when using multiple antennas at both transmitter and receiver ends of a communications system. New techniques, which account for the extra spatial dimension, have been adopted to realize these gains in new and previously existing systems. MIMO technology has been adopted in multiple wireless systems, including Wi-Fi, WiMAX, LTE, and is proposed for future standards (such as LTE-Advanced and IMT-Advanced). The goal of this paper is to implement and OFDM Physical layer specification by following IEEE 802.16e-2005[1] Using Adaptive decision control techniques we analyze the performance of OFDM physical layer in mobile 5G LTE based on the simulation results of Bit-Error-Rate (BER), Signal to Noise Ratio (SNR) and Probability of Error (Pe). The performance analysis of OFDMA- is done in MATLAB under reference channel model with channel equalizer.

5G, Dense networks, MIMO, LTE

"High Performance 5G Communication Design Using Intelligent Modulation Choice", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.556-559, June 2019, Available :http://www.jetir.org/papers/JETIR1906Y07.pdf

"High Performance 5G Communication Design Using Intelligent Modulation Choice", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp556-559, June 2019, Available at : http://www.jetir.org/papers/JETIR1906Y07.pdf