• Shivananda Pujar
• Dr K R Dinesh
• Dr.Jagadish S P

This paper constitutes the wear study of 10%Carbon , 10% Jute And 10% E-Glass Fiber Polymer composite material used as Bio-material. Characterization of 10%Carbon , 10% Jute And 10% E-Glass fiber polymer composite material with the low density, economical for prosthetic bone with respect to biocompatibility and the mechanical behaviour of long human bones, such as Tibia Bone. According to the ASTM Standard G-99 the specimen is fabricated by using the Epoxy resin- LY556 as the matrix material and the Hardener-HY 951 with the 10%Carbon , 10% Jute And 10% E-Glass Fiber as the reinforcement material with fiber weight fraction, 0+/- 900 fiber orientation. By using the Hand Layup fabrication technique the specimen are prepared. The wear tests were conducted on the 10% percentage standard samples prepared. The study was conducted by using a pin-on-disk apparatus and is issued under the standard ASTM G- 99. For the PIN-ON-DISK wear test conducted in this research, the specimens were a pin with a rounded tip, which is positioned perpendicular to a flat circular disk.and track dia is 60mm. It is found that appreciable improvements in tribological properties of the 10%Carbon , 10% Jute And 10% E-Glass fiber polymer composite material and comparison is made on these polymer composite material it is found that 10%Carbon has less wear rate of 10 micrometers for 2Kgf and time duration is 5 minute and similarly 10%Carbon has less wear rate of 16 micrometers for 2Kgf and time duration is 10 minute compare to other fibre materials and also This study suggests 10% jute fiber polymer composite material is economical one compare to E-Glass fiber and Carbon fibre and can be used for different applications in the human body bone replacement or for Tibia bone as the alternative implant material.

Hand layup Fabrication Technique, Wear Resistance, Bio-Material, 10%Carbon , 10% Jute And 10% E-Glass fiber polymer composite material, orthopaedic Implants.

"“Investigation on Wear behavior of Carbon, Jute and E-Glass fiber Reinforced Polymer Composite Materials Used For BIO-Medical Application”", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.226-240, June 2019, Available :http://www.jetir.org/papers/JETIR1907033.pdf

"“Investigation on Wear behavior of Carbon, Jute and E-Glass fiber Reinforced Polymer Composite Materials Used For BIO-Medical Application”", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp226-240, June 2019, Available at : http://www.jetir.org/papers/JETIR1907033.pdf