• Sanjay Choudhary
• Pradeep Kumar
• Alok Bihari Singh

Abrasive flow machining (AFM) is a progressed nonconventional machining process, which is utilized to deburr, machine complex shape and a successful method to clean unsymmetrical, ordinary/unpredictable surfaces and inside structure of parts, which are hard to reach by any customary machining process .In this procedure rough medium is expelled forward and backward through the entries of the metal work-piece and tooling is created to hold the work piece immovably. In this examination, the impact of process parameters are abrasive size, number of cycles and pressure were optimized. In the improvement surface harshness is taken as yield. In present trial think about, the impact of process factors on surface harshness was exhibited by L9 symmetrical cluster dependent on Taguchi and ANOVA Technique utilizing Minitab17 which gives a satisfactory reproduced outcome.

Abrasive Flow Machining, ANOVA, brass, Minitab17, Surface Roughness, Taguchi method

"Analysis of Surface Roughness in Abrasive Flow Machining by Taguchi Technique", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.236-239, June 2019, Available :http://www.jetir.org/papers/JETIR1907338.pdf

"Analysis of Surface Roughness in Abrasive Flow Machining by Taguchi Technique", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp236-239, June 2019, Available at : http://www.jetir.org/papers/JETIR1907338.pdf