• Md Mushid
• Dr. Vijay Mittal2

There are hundreds of abrasives and types of honing tools are available in market. Achieving the best optimized results are going to depend on the type of need surface, as well as its application. There are basically three types of abrasives are available use for honing: silicon carbide, aluminum oxide, and diamonds. Each type is bonded in honing sticks called stones, each with a place in honing. Nothing of the three can be called the general purpose of sharpening all kinds of materials. In this paper an effort has made to summarize the quality of stones and their compatible materials. The quality of surface finish has great significance of stone grit size and their bonding material. Due to grit locking phenomena heat generating rate also increase. There by affect surface quality. This effort will help to chose proper types of abrasive stone without adverse affect on performances.

Abrasive grain size, Honing lubricant, speed of Hone, Lubricant Temperature

"REVIEW OF ABRASION MACHINING PROCESS PARAMETERS AND THEIR EFFECTS ON SURFACE FINISH", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.325-328, June 2019, Available :http://www.jetir.org/papers/JETIR1907802.pdf

"REVIEW OF ABRASION MACHINING PROCESS PARAMETERS AND THEIR EFFECTS ON SURFACE FINISH", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp325-328, June 2019, Available at : http://www.jetir.org/papers/JETIR1907802.pdf