• Vijay Kumar. S
• Shivasharanayya swamy
• Lakshmindevamma M. M
• Harish.H

The temperature generated during deep hole drilling operations is due to the heat generated between the interface of work piece surface and the tool surface. Several research study have been conducted to predict the temperature involved while drilling process as a predominant functions of many parameters like feed rate, torque, depth of cut etc. Similarly many experimental procedures have been conducted by several researches to measure temperature directly by using thermocouples, infrared measurement, pyrometer, and thermisters etc. There is no precise experimental method is available to measure analytical value of energy, power, heat flux etc, while drilling process. The temperature rigma depends on material compositions and physical properties. This paper presents a review of various experimental and analytical methods for measurement of temperature during drilling operations.

Temperature, Drilling, Heat flux, Temperature, Thermal response.

"Prediction of Temperature Measurement Methods during Rotary Drilling Operations - A Review", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.539-543, June 2019, Available :http://www.jetir.org/papers/JETIR1907C41.pdf

"Prediction of Temperature Measurement Methods during Rotary Drilling Operations - A Review", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp539-543, June 2019, Available at : http://www.jetir.org/papers/JETIR1907C41.pdf