• Gourav
• Er. Nasir Ali
• Er Abhishek

Pervious concrete (no-fines concrete) is a concrete containing little or no fine aggregate; it consists of coarse aggregate and cement paste. It seems pervious concrete would be a natural choice for use in structural applications in this age of ‘green building’. It consumes less raw material than normal concrete (no sand), it provides superior insulation values when used in walls, and through the direct drainage of rainwater, it helps recharge groundwater in pavement applications. Pervious concrete is a mixture of gravel or stone, cement, water and little or no sand which creates an open cell structure that allows water and air to pass through it. According to EPA (Environmental Protection Agency’s) storm water runoff can send as much as 90% of pollutant such as oil and other hydrocarbon. The ability of pervious concrete to allow water to flow through itself recharges ground water and minimizes the extent of pollution and storm water runoff. Pervious concrete is used to allow storm water to infiltrate through the pavement and reduce or eliminate the need for additional control structures, such as retention ponds. In this research, 6 % to 24 % aggregate is used to partially replace coarse aggregate.

Pervious concrete, compressive strength, workability, Permeability

"DEVELOPMENT OF HIGH QUALITY PERVIOUS CONCRETE FOR PAVEMENTS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.122-130, June 2019, Available :http://www.jetir.org/papers/JETIR1907E17.pdf

"DEVELOPMENT OF HIGH QUALITY PERVIOUS CONCRETE FOR PAVEMENTS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp122-130, June 2019, Available at : http://www.jetir.org/papers/JETIR1907E17.pdf