• Kapil
• Rajesh Kumar
• Ravinder Kundu

This study present the how to optimize the injection molding parameters and how to analysis them. Injection molding is important now days in industries. In this process, material is injected into a mold and after that it gets desired shape. To increase the productivity we analyze the parameter and optimize them. In today life quality of product plays an important role by this customer satisfied. Each company wants to expand so that they have to focus on their customer. In this work we found that sink mark or shrinkageare main problems which affect the product quality. Also we are work on how to reduce cycle time as well so that we increase productivity.In this project experiment done on 10 kw injection molding machine and material chosen was polyethylene material. In this project we take three different thickness materials which are 0.5 mm, 1.5mm and 4 mm thickness. After choosing the material we did experiment on selective parameters which are to be optimized. With the help of RSM and taguchi method optimization had done. Data is collected by the many experiments in all conditions. After that data is optimized using taguchi and RSM technique. Hence we found that at 226⁰c 0.5 mm thickness material gives best result with this material we found that shrinkage and cycle time reduces and gives best production.

R&D, Quality,Design, RSM technique , Matrix., ignition ,insert.

"PARAMETRIC ANALYSIS AND OPTIMISATION OF INJECTION PLASTIC MOULDING AND MOULDING MATERIAL", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.259-262, June-2019, Available :http://www.jetir.org/papers/JETIR1907T07.pdf

"PARAMETRIC ANALYSIS AND OPTIMISATION OF INJECTION PLASTIC MOULDING AND MOULDING MATERIAL", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp259-262, June-2019, Available at : http://www.jetir.org/papers/JETIR1907T07.pdf