• KINJAL
• JAYDEEP BHANDERI
• Dr.J.V Mehta

Abstract: Improvement of properties of expansive soil in terms of cost, durability and strength is the key from engineering point of view. The expansive soils could be stabilized using industrial waste. In paper present about study and comparison of properties of black cotton soil stabilized with the help of brick dust manufacturing waste (BDMW) & cement dust manufacturing waste (CDMW) as stabilizer brick dust manufacturing waste (BDMW) and Cement dust manufacturing waste (CDMW) are industrial by-product. Day by day increasing the cement bending material for infrastructure. The disposal of this fine dust like CDMW and brick dust manufacturing waste (BDMW) becomes a more difficult as environmental aspect and also it’s affect human nature as get suspended on air. In this paper we study about soil engineering properties with addition of cement dust manufacturing waste (CDMW) as stabilizer and brick dust manufacturing waste (BDMW) as stabilizer and compare in terms of soil properties like shear strength, swelling pressure and various engineering parameters like OMC& MDD, CBR value by conducting appropriate tests. With the help of above properties results we can Keeping in mind that the needs for bulk mass of solid waste can be utilized effectively, and also help to keeping good environment by using stabilizer as waste material.

Expansive soil, Cement dust manufacturing waste (CDMW) stabilizer1, Brick dust manufacturing waste (BDMW) stabilizer2, soil stabilization, shear strength, OMC& MDD, CBR value

"Using Brick Dust Manufacturing Waste and Cement Dust Manufacturing Waste as Stabilizing Material for Expansive Soil", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 2, page no.525-531, February-2020, Available :http://www.jetir.org/papers/JETIR2002078.pdf

"Using Brick Dust Manufacturing Waste and Cement Dust Manufacturing Waste as Stabilizing Material for Expansive Soil", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 2, page no. pp525-531, February-2020, Available at : http://www.jetir.org/papers/JETIR2002078.pdf