• S NADIR HUSSAIN
• S JITHENDRA NAIK
• L. BALASUBRAMANYAM

The application of CAD/CAM in fashion development of agricultural cultivator at the idea of finite element technique and simulation methodology is completed with the aid of victimization UG-software program for the structural analysis. The load and electricity of agricultural cultivator a compromising is wanted within the productiveness of soils. There rectangular degree chiefly three absolutely exceptional soils crimson soils, loam soils and black soils rectangular degree gift in our regions. The soil situations were taken to model a much higher cultivator device segment in tractor-enforce systems. Those fastened plates do not seem to be appropriate if any adjustments within the fields or crop lands. Because, while seeding the size of plantation isn't fixed, consequently this reason better rate of cultivation in the course of prehearing periods. Hence, modifications of rectangular degree wished inside the current cultivator for growing flexibilities extensive of the equipment between them. We pick hollow section for decreasing the general weight of cultivator to boost gasoline economic system. In my modal 5 form of iron hole rectangular sections for device, having period four hundred mm and thickness 10 mm. The equipment had been fastened one is to returned frame and opportunity is to the front body with 3 plates with the aid of nut and bolt joints, while the two center locations had been mounted with some of plates orientating on identical directions with perspective of dispositions to the frame base. The widths in between the tools have been various and total period of the cultivator is one thousand mm, mounted frame is cast iron cloth for improvement the rate parameter. Malleable cast iron , Nodular cast iron and solid iron G60 become chosen for better in failure predictions, even though it’s strength isn't sufficient as compared to steels but, this substances square degree better inside the black and soil sands that don't seem to be enough stiff in excessive layers. The seed and chemical tubes have been additionally fastened in such how that the changed phase implements such facilities to farmers.

Agriculture Cultivator, materials like Malleable Cast iron, Nodular Cast iron and Cast Iron G60, UNIGRAPHICS11.0, NX-NASTRAN, Stress, Strain and Displacement.

"AGRICULTURE CULTIVATOR MODELING AND SIMULATION ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 2, page no.286-295, February-2020, Available :http://www.jetir.org/papers/JETIR2002244.pdf

"AGRICULTURE CULTIVATOR MODELING AND SIMULATION ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 2, page no. pp286-295, February-2020, Available at : http://www.jetir.org/papers/JETIR2002244.pdf