UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 9 | September 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 7 Issue 2
February-2020
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR2002436


Registration ID:
229198

Page Number

201-206

Share This Article


Jetir RMS

Title

Design and Analysis of Driven Shaft for Automobile

Abstract

Drive shafts in commercial heavy duty vehicle are subjected to cyclic loads due to variation in the torque demanded by the varying road loads. Cases of failure of the drive shaft of heavy duty trucks have been reported, which provides an opportunity to investigate the issue. In this project an attempt has been made on prediction of fatigue life of the drive shaft using FEA technique. The load spectrum acting on the drive shaft is calculated for specified terrain. Structural analysis was carried out on the FE model of drive shaft, and potential areas of high stress concentration are obtained. Von Mises stress, fatigue damage, fatigue life, factor of safety and total deformation are the results of fatigue analysis. It was observed that from the static analysis that the roots of the splines are the areas of high stress concentration. The fatigue analysis revels that the drive shaft fails in the region of high stress concentration as expected. The fatigue life of the component is found to be infinite for design pay load. The life of the drive shaft for 40% and 50% over load is 69806 kilometers and 20564 kilometers respectively. The present work can be used in automobile industry as a reference for predicting life of any component, in the drive line of the automobile subjected to non constant amplitude loading.

Key Words

Driven shaft, Vonmises stress, Vonmises strain and Fatigue failure

Cite This Article

"Design and Analysis of Driven Shaft for Automobile", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 2, page no.201-206, February 2020, Available :http://www.jetir.org/papers/JETIR2002436.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Design and Analysis of Driven Shaft for Automobile", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 2, page no. pp201-206, February 2020, Available at : http://www.jetir.org/papers/JETIR2002436.pdf

Publication Details

Published Paper ID: JETIR2002436
Registration ID: 229198
Published In: Volume 7 | Issue 2 | Year February-2020
DOI (Digital Object Identifier):
Page No: 201-206
Country: Tirupati, Andhra Pradesh, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0003414

Print This Page

Current Call For Paper

Jetir RMS