UGC Approved Journal no 63975

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 9 | Issue 8 | August 2022

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 7 Issue 4
April-2020
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR2004302


Registration ID:
230869

Page Number

800-806

Share This Article


Jetir RMS

Title

Use of over burn Brick as Coarse Aggregate in Concrete mix

Abstract

The study during this paper is managed to check the workability of exploitation crushed over burn bricks to substitute the coarse mixture (gravel) in concrete. 2 kinds of concrete intermixture are ready. the crucial one may be a mixture of 1:2:4 while not crushed over burn bricks and is working as a reference mixture .The other is formed of many weight of crushed over burn bricks. a complete of thirty numbers of concrete specimens are casted with and while not crushed over burn bricks and tested below density and split tension as per relevant to British ordinary specifications. take a look at results indicated that mistreatment crushed bricks reduces the strength of concrete. Also, the quantity of water to cement amount relation will increase for perpetual slump once the proportion of crushed bricks increased. The results indicate that the crushed over burn brick are appropriate to switch the granite mixture in concrete making. Test mixes of crushed over burn brick concrete were ready by replacement the Granite Aggregate with twenty fifth, 50%, seventy fifth and 100 percent crushed over burn bricks by volume. M20 grade of each Granite aggregate and crushed over burn brick concretes were ready and tested to match the compressive strength. The take a look at results showed that it's doable to provide crushed over burn brick concrete with characteristics like those of Granite aggregate concrete with twenty fifth substitutes. Performances of light-weight foamed concretes that are made of partial substitution of waste over burn brick as coarse aggregate has been investigated during this study. The analysis aims were to spot the properties and characteristic of lightweight foamed concrete oppression waste over burn brick as various materials to reduce the reduction of traditional coarse aggregate from waste over burn brick. Four completely different proportions of concrete mixtures victimization new coarse mixture are ready that comprises twenty fifth, 50%, 75%, and 100 percent waste over burn brick. Foamed were injected into concrete mixture to supply lightweight concrete with correct proportions. The samples have undergone some take a look ating as well as compression test, water absorption test, workability test and density test. From the results obtained, light-weight concrete that were created with twenty fifth substitution of waste over burn brick showed the very best compressive strength of twenty five MPa with density of 1580 kg/m3.

Key Words

over burn crushed brick, coarse aggregate, concrete, concrete mix, slump test.

Cite This Article

"Use of over burn Brick as Coarse Aggregate in Concrete mix ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 4, page no.800-806, April-2020, Available :http://www.jetir.org/papers/JETIR2004302.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Use of over burn Brick as Coarse Aggregate in Concrete mix ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 4, page no. pp800-806, April-2020, Available at : http://www.jetir.org/papers/JETIR2004302.pdf

Publication Details

Published Paper ID: JETIR2004302
Registration ID: 230869
Published In: Volume 7 | Issue 4 | Year April-2020
DOI (Digital Object Identifier):
Page No: 800-806
Country: GAUTAM BUDDH NAGAR, UTTAR PRADESH, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0002895

Print This Page

Current Call For Paper

Jetir RMS