• Gorsiya Rupesh H.
• Hetal Gorasiya
• Dinesh B. Bhuva

The major problem in the construction industry nowadays is inadequate and unavailability of construction materials, However the main environmental problem is the disposal of PVC plastic waste ss. In this experimental study, the use of plastic in concrete has been tried and studied to focus the behavior of compression members under different proportions of plastic. PVC plastic waste -based concrete cubes and cylinders were manually cast and the strength of the test concrete was evaluated in terms of compression and partition stress. According to research it comes to known that the strength of the plastic changed the compression in terms of compression and partitioning and can be compared to conventional concrete. The purpose of this current study is to partially replace fine aggregate by PVC plastic waste granules (0%, 5%, 10%, 15% and 20%) that will provide the advantage of reducing dead weight composition. This combination of cubes and cylinders was subjected to compression and split stress to find the strength parameter.

Concrete, PVC Plastic Waste, Strength, Workability and Light Weight.

"A Study on Concrete Using Plastic Waste as Partial Replacement of Fine Aggregate and Metakolin as an Admixture", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 6, page no.2224-2230, June-2020, Available :http://www.jetir.org/papers/JETIR2006320.pdf

"A Study on Concrete Using Plastic Waste as Partial Replacement of Fine Aggregate and Metakolin as an Admixture", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 6, page no. pp2224-2230, June-2020, Available at : http://www.jetir.org/papers/JETIR2006320.pdf