• Tejas Kolhe
• Gajanan Kumbhar
• Vathsala Poojary
• Shaikh Waris

Building a prototype air contactor and absorbing carbon dioxide from ambient air for 5-6 days outdoor operation to test our packing-based contactor design in an operational environment. Our operation with pulsed liquid flow allows us to fully wet the surface of our structured packing with a brief period of full flow, then to cut flow for the duration of several minutes to let the liquid slowly react away as CO2 is absorbed. The prototype contactor is manufactured from PVC or stainless steel depending on the cost per-surface-area, the solvent used, and pressure drop on the per-surface-area basis. This prototype focuses on wet-scrubbing air contactor design that is rooted in the gas scrubbing and cooling tower industries and to regenerate our captured purified pipeline-quality CO2. Extraction and usage of pure CO2 from guanidine complex or Na2CO3 by slight heating or titration can be done.

CO2 CAPTURE,CO2 CONTACTOR,CO2 CAPTURE PROTOTYPE

"STUDY ON CO2 CAPTURING PROTOTYPE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 8, page no.552-556, August 2020, Available :http://www.jetir.org/papers/JETIR2008374.pdf

"STUDY ON CO2 CAPTURING PROTOTYPE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 8, page no. pp552-556, August 2020, Available at : http://www.jetir.org/papers/JETIR2008374.pdf