• Dr. Yuvaraj Sundaram
• R. Seshasayanan
• A. Maniannamalai

In this paper to study the various performances of Manual Mode, ON-OFF/P/PI/PD/PID controllers on Pressure process station. In various pressure process control applications, such as servo-valves or variable displacement pumps, Train traction and Stem boiler are used to meter the flow into a supply line or a chamber with relatively constant capacity parameter, thereby controlling its pressure gauge under this influence of disturbances such as flows in and out of the controlled volume. For most applications proportional integral derivative (PID) controllers are suited and widely used in research and practice applications. However, tuning of various pressure controller parameters for pressure control is usually done by trial and error method due to the lack of applicable tuning rules for in this case. In this paper examines the various pressure controllers’ performance controlled by pressure applications and proposes a set of effective but simple PID feedback gain formulas. They can be implemented by practitioners on the basis of data that in most cases is available from station drawings and the process control software data graph. The tuning rule's parameters are based on a straight forward frequency response design. They yield swift and robust performance various pressure process in simulation and experiment.

Process control, ON-OFF, PID controller, PSI, Pressure Process Station.

"HIGH PERFORMANCE PID CONTROLLER FOR PRESSURE PROCESS STATION", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 8, page no.739-749, August 2020, Available :http://www.jetir.org/papers/JETIR2008403.pdf

"HIGH PERFORMANCE PID CONTROLLER FOR PRESSURE PROCESS STATION", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 8, page no. pp739-749, August 2020, Available at : http://www.jetir.org/papers/JETIR2008403.pdf