• Sourav Kumar
• Prof. Vikrant Dubey
• Prof. Kapil Soni

The research reveals the free vibration of the uniform and embroidered uniform under one of the many cracks using Finite Element Method (FEM) in place of ANSYS 15.0. Specific cracks are the most open cracks in the environment. Due to the presence of a crash, a complete flexible matrix is established by adding an additional variable matrix to the flexible matrix of the corresponding coastal element .The local variable matrix is located in the Linear Elastic Fracture Mechanics line. An experimental study was conducted to determine the accuracy of the numerical results. The metal types of the square cross section considered for that test and the test results are compared with the price analysis using Finite Element Method (FEM) in the ANSYS 15.0. The results obtained in the test are accurately assessed and analyzed by setting unlimited breaks of the first three methods as a function of measuring the depth of the various cracks.

FEM, ANSYS 15.0, Modal hammer, Accelerometer, FFT Analyzer, Pulse software, Instron, Tensile Strength etc.

"A WORK PAPER ON - ANALYSIS OF CRACKED STRUCTURE WITH FINITE ELEMENT METHOD (ANSYS 15.0)", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 9, page no.863-870, September-2020, Available :http://www.jetir.org/papers/JETIR2009115.pdf

"A WORK PAPER ON - ANALYSIS OF CRACKED STRUCTURE WITH FINITE ELEMENT METHOD (ANSYS 15.0)", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 9, page no. pp863-870, September-2020, Available at : http://www.jetir.org/papers/JETIR2009115.pdf