• Aditya Vishvanath Mhatre
• Bhavik Ramesh Bhanushali
• Mohammed Rohaan Muslim Shaikh
• Prof. Nikhil Ingale

The main aim of the project is to improve the strength characteristics of pervious concrete by using special liquid type of water reducing admixture in combination with fibres in pervious concrete mix. The analysis was undertaken by conducting a number of standard concrete tests and comparing the characteristics of the high strength pervious concrete and conventional pervious concrete samples. The tests include compressive strength test, permeability test to determine its properties. Cubes and cylinders are the specimens used for the tests and they are prepared using appropriate mix proportions. The choice of selecting suitable mix proportions of pervious concrete lead to favorable results. In our design and testing we have compared our results with the lowest grade of pavement pervious concrete to check for improvement after addition of admixtures. We used two primary admixtures, one being an organic superplasticizer to decrease the water-cement ratio and other being polypropylene fibres to amass strength in the final product. Proper balance of superplasticizer and fibre content had to be maintained to avoid loss of strength. To develop our conclusions, we followed with basic strength and permeability testing on the cubes.

Pervious Concrete, No Fineness concrete, Water drain, Ground water improvement. Crushing strength, Impact value, Ductility, Penetration, stripping value, fibre, superplasticizer

"Design And Testing Of High Strength Pervious Concrete For High Traffic City Pavements Like Mumbai", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 4, page no.519-524, April-2021, Available :http://www.jetir.org/papers/JETIR2104270.pdf

"Design And Testing Of High Strength Pervious Concrete For High Traffic City Pavements Like Mumbai", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 4, page no. pp519-524, April-2021, Available at : http://www.jetir.org/papers/JETIR2104270.pdf