• pankaj kumar singh
• Omprakash Mehta
• Mohd shariq
• Dr. Nitin Chauhan

In order to overcome the problem related to overhead tank cleaning, we designed an automatic system overhead tank cleaning system to provide high safety, high efficiency, less cleaning time, and avoid environmental pollution problems. The main purpose of the project is to develop a mechanical system for cleaning cylindrical water tanks in households. The mechanical system consists of two main mechanisms, namely the rack and pinion mechanism, and the reciprocating four-bar linkage mechanism. The rack is fixed on the motor, and the four-bar linkage is installed on the motor shaft. The PVC brush is connected to the end of the four-bar linkage. The four-bar linkage mechanism is made in such a way that it can be adjusted according to the inner diameter of the tank. After the motor is started, the linkage device rotates and cleans the wall and bottom of the box with the help of a brush. The purpose of this project is to reduce the workload of personnel and prevent chemicals from affecting the health of personnel entering the cleaning tank.

Tank cleaning , Motor shaft , PVC brush , Water tank

"AUTOMATIC TANK CLEANER", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 5, page no.a685-a689, May-2021, Available :http://www.jetir.org/papers/JETIR2105085.pdf

"AUTOMATIC TANK CLEANER", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 5, page no. ppa685-a689, May-2021, Available at : http://www.jetir.org/papers/JETIR2105085.pdf