• Deokar Amarjeet Hanumant
• Shirsath M.N.

The current examination portrays the consequences of testing level ferrocement boards supported with various number of wire network layer and variety in board thickness. The primary target of these exploratory tests is to consider the impact of utilizing various quantities of wire network layers and thickness minor departure from the flexural strength of level ferrocement boards and to look at the impact of fluctuating the quantity of wire network layers on the pliability and a definitive strength of this kind of ferrocement structure. In this examination, every one of the examples was partitioned into four gatherings to research the strength and conduct of ferrocement level boards exposed to two-point stacking. 24 ferrocement components were built and tried.Twenty four ferrocement elements were constructed and tested. The used number of wire mesh layers is single, two, three and four layers; also thicknesses of panels are 30mm and 40mm.

1078

"Experimental Study on Effect of Using Different Numbers of Wire Mesh Layers and Thickness Variation on the Flexural Strength of Flat Ferrocement Slab Panels", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 5, page no.f385-f389, May-2021, Available :http://www.jetir.org/papers/JETIR2105718.pdf

"Experimental Study on Effect of Using Different Numbers of Wire Mesh Layers and Thickness Variation on the Flexural Strength of Flat Ferrocement Slab Panels", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 5, page no. ppf385-f389, May-2021, Available at : http://www.jetir.org/papers/JETIR2105718.pdf