• Suleiman Babani
• Musefiu Aderinola & Abba Mohammed
• Kabiru Bashir
• Musa Hassan Muhammad
• Hamisu Adamu

The wind turbine was proposed to be designed and constructed with an estimated power output of 65w at maximum speed and 30w at minimum speed from a generator with currents of 5.4amps to 10.8amps under the gear ratio of 1:4 However, after the work was done, the maximum power output was found to be 40w and the current of 6.7amp which is within the range. The blade is constructed from a laminated wood material with relevant diameter of 80 inches with three blades. The work was tested and mounted on the top of the building to reach the required heights of 10m. Based on the test, the efficiency of the wind turbine was found to be 56%.

Wind turbine, power output, laminated wood, design, generator.

"DESIGN, CONSTRUCTION AND INSTALLATION OF HORIZONTAL AXIS WIND TURBINE FOR THE ELECTRIFICATION OF ELECTRICAL CLASS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 6, page no.a109-a114, June-2021, Available :http://www.jetir.org/papers/JETIR2106015.pdf

"DESIGN, CONSTRUCTION AND INSTALLATION OF HORIZONTAL AXIS WIND TURBINE FOR THE ELECTRIFICATION OF ELECTRICAL CLASS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 6, page no. ppa109-a114, June-2021, Available at : http://www.jetir.org/papers/JETIR2106015.pdf