• Abhilash Dliprao Jachak

In order to compete in the ever growing competent market it is very important for a structural engineer to save time. As a sequel to this an attempt is made to analyze and design a multistoried building by using a software package STADD PRO. As STAAD Pro is the current leading design software in the market, many structural designing companies use this software for their project design purposes. So, this article mainly deals with the analysis of the results obtained from the design of a building structure when it is designed using STAAD Pro Software. The software method of analysis is used for a G+5 Residential building with AAC blocks and conventional bricks, located in Zone-III, Zone IV and zone V. In this study two types of infill material used first is brick infill, second is AAC block infill. So there for two types of infill material in which 18 models will be prepared in Staad pro. In this study G+5 storey building is considered for analysis which is located in Zone III, zone IV and Zone V earth quake region.Static analysis is done using Staad pro software, soil conditions is to be medium, Soft and Hardand importance factor is to be taken as 1.2. various parameter studied like lateral displacement of building, axial load in column, Maximum Bending moment and Maximum shear force for a particular beam for all two types of material and for all cases and weight calculations as per code IS 1893:2002.

Conventioal Bricks, AAC blocks, Staad Pro

"SEISMIC ANALYSIS OF G+5 BUILDING WITH AAC BLOCKS AND CONVENTIONAL BRICKS FOR DIFFERENT ZONES BY USING STAAD PRO", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 6, page no.d683-d691, June-2021, Available :http://www.jetir.org/papers/JETIR2106503.pdf

"SEISMIC ANALYSIS OF G+5 BUILDING WITH AAC BLOCKS AND CONVENTIONAL BRICKS FOR DIFFERENT ZONES BY USING STAAD PRO", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 6, page no. ppd683-d691, June-2021, Available at : http://www.jetir.org/papers/JETIR2106503.pdf