• Prajkta Yashvant Bagade
• Amey R. Khedikar

There may be a high demand for high rise buildings in modern society and therefore the proceeded demand for development and high rise buildings has established the requirement for more extraordinary and efficient construction systems. One such system is that the Outrigger system. These lateral loads are wind and seismic loads. To forestall this lateral load on high-rise buildings and appropriate working construction system must be identified. For lateral resistance of high buildings there are many construction working systems. In tall buildings the stiffness and the drift of the building is even more important and useful. The aim of the paper is to detailed and conceptualizing the varied configurations of belt truss structures system and to integrate current tall structures into longer by use of belt truss system. Additionally many issues associated with outriggers and belt truss systems arealso discussed in the paper in detailed. A close scrutiny of literature accessible within the field of Outrigger system is applied and therefore the summary and gaps encountered and discussed within the study are listed during this paper. This paper introduces a substitute concept of virtual Outrigger system. In which using the belt truss structural within the RCC construction building so as to extend the performance of the building under the dynamic loads is researched. The assorted benefits of using virtual Outrigger over traditional ones are emphasized. Knowledge of Basements as a Virtual outrigger is further reviewed inside the paper.

Belt Truss, Outrigger, High Rise Building, Lateral Load Resisting System (LLRS).

"Rcc Framed Building With Using Belt Truss", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 6, page no.e149-e158, June-2021, Available :http://www.jetir.org/papers/JETIR2106578.pdf

"Rcc Framed Building With Using Belt Truss", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 6, page no. ppe149-e158, June-2021, Available at : http://www.jetir.org/papers/JETIR2106578.pdf