• G. Barik
• Asish kumar sahoo
• A. Behera
• Tanisha Ipsita Hota
• P. Das

This paper addresses the challenge of minimizing heat loss through the walls of a heat treatment furnace by analyzing three materials: chromite, molybdenum, and silica, in terms of their thermal conductivity, wall thickness, and area. These materials are compared to identify the best combination of these mechanical parameters using the Taguchi mathematical model of an L9 orthogonal array with three levels of significance. By determining the optimal interaction between these parameters, we can reduce heat loss by 13% to 30%, compared to what would have been achieved without considering parameter interchange

Thermal conductivity, wall thickness, and area of the wall of heat furnace

"Optimizing Wall Thickness in Heat Treatment Furnaces with Different Materials: A Case Study", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 6, page no.g724-g729, June-2021, Available :http://www.jetir.org/papers/JETIR2106917.pdf

"Optimizing Wall Thickness in Heat Treatment Furnaces with Different Materials: A Case Study", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 6, page no. ppg724-g729, June-2021, Available at : http://www.jetir.org/papers/JETIR2106917.pdf