UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 8 Issue 7
July-2021
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR2107070


Registration ID:
312009

Page Number

a569-a577

Share This Article


Jetir RMS

Title

Analysis on technique to recover the waste heat from the automotive exhaust with thermal energy storage using phase change material

Abstract

This research will conduct a comparative examination of several methods to recover waste heat from automobile exhaust using thermal energy storage. Thermal energy storage (TES) is a technology for storing waste heat so that it can be used whenever it is needed. Waste heat recovery systems (WHRS) lower the temperature of gas that is released into the environment. We will use phase change material as the storing unit in this experiment, and we will learn about its performance and efficiency during the process, as well as how it will be useful for the waste heat recovery system. So, in this analysis we perform an investigation into waste heat produced by a diesel engine's exhaust with the help of a phase change material called acetamide (CH3CONH2). Which operates in the temperature range of 298k to 400k. We prepared an equipment (cuboid shape) with proper sealings and a removable top. There are two valves: one on the connecting side, which connects to the exhaust pipe end, and the other on the opposite side, which allows the exhaust gases to exit the system. Inside this cuboid there are 5 open mugs which are filled with the phase change material & every mug also contain a temperature sensor dipped inside the pcm which is in salt form; the sensors’ wiring is connected to the RTD machine outside the cuboid by passing the wire through the top for the measurements of temperature at different loading conditions to study the heat storing capacity and efficiency of the PCM. As the results of our little experiment, we got some promising values as our system provides us with the efficiency of 21% at the load of 500W, 20.95% at the load of 1000W, 20.9% at the load of 1500W, 20.8% at the load of 2000W, 20.7% at the load of 2500W.

Key Words

Cite This Article

"Analysis on technique to recover the waste heat from the automotive exhaust with thermal energy storage using phase change material", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 7, page no.a569-a577, July-2021, Available :http://www.jetir.org/papers/JETIR2107070.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Analysis on technique to recover the waste heat from the automotive exhaust with thermal energy storage using phase change material", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 7, page no. ppa569-a577, July-2021, Available at : http://www.jetir.org/papers/JETIR2107070.pdf

Publication Details

Published Paper ID: JETIR2107070
Registration ID: 312009
Published In: Volume 8 | Issue 7 | Year July-2021
DOI (Digital Object Identifier):
Page No: a569-a577
Country: Faridabad, Haryana, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

000581

Print This Page

Current Call For Paper

Jetir RMS