• Deepak Rawat
• Vinay Yadav
• Robin Singh
• Sagar Paruthi

In Civil Engineering , Structural design is considered as its primary aspect. The foremost basic thing in structural engineering is the design of simple basic components and members of building for examples slabs, beams, columns and footings. The first step in any design is to decide the plan of the particular building after that the location of beams and columns are decided. Then the vertical loads like dead and live loads are calculated. Once the loads are obtained, the component which takes the load first i.e. the slabs can be designed. From the slabs, the loads are transferred to the beams. The loads (mainly shear) from the beams are then transferred to the columns. For designing columns, it is necessary to know the moments they are subjected to. For this purpose, frame analysis is done by Moment Distribution Method. Finally, the footings are designed based on the loading from the column and also the soil bearing capacity value for that particular area. The building was initially designed as per IS 456: 2000 without considering earthquake loads using STAAD.pro software. Then the building was analyzed for earthquake loads as per Equivalent static analysis method and after obtaining the base shear as per IS1893: 2002.

Seismic analysis, STAAD PRO, Load cases, Bending Moment, Zone Factor.

"DESIGN AND SEISMIC ANALYSIS OF HOSPITAL BUILDING BY EQUIVALENT STATIC ANALYSIS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 7, page no.b162-b175, July-2021, Available :http://www.jetir.org/papers/JETIR2107151.pdf

"DESIGN AND SEISMIC ANALYSIS OF HOSPITAL BUILDING BY EQUIVALENT STATIC ANALYSIS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 7, page no. ppb162-b175, July-2021, Available at : http://www.jetir.org/papers/JETIR2107151.pdf