• MOE MIN HTWE

Dose mapping exercises for Performance Qualification( PQ) are used to identify locations and magnitudes of minimum and maximum doses within the product and to show the relationship between these doses and the dose at a monitoring position. This experiment was performed at 10 MeV/ 10kW electron beam accelerator which is operating in institute of Nuclear Chemistry and Technology (INCT), Warsaw, Poland. In this experiment, the acceptable dose for medical device sterilization 28kGy is applied B3 films and the dose was read out by B3 Risø Scan system. From the absorbed dose measurements, Dmin is 24.3 kGy and Dmaxis 35.8kGy.The overall dose received in container is 88.5 % to 136%. Dose Uniformity Ratio DUR is 1.4.

Dose mapping, electron beam sterilizaition, B3 Riso scan

"Dose mapping for Performance Qualification of Electron Beam Sterilization Facility using B3 Riso Scan Dosimetry System", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 9, page no.e595-e596, September-2021, Available :http://www.jetir.org/papers/JETIR2109473.pdf

"Dose mapping for Performance Qualification of Electron Beam Sterilization Facility using B3 Riso Scan Dosimetry System", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 9, page no. ppe595-e596, September-2021, Available at : http://www.jetir.org/papers/JETIR2109473.pdf