UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 8 Issue 10
October-2021
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR2110193


Registration ID:
315932

Page Number

b836-b841

Share This Article


Jetir RMS

Title

Effect of Nozzle angle and Nozzle Diameter in Performance of Extrusion in 3D Printer Liquefier

Authors

Abstract

In the current work, the CAD model of 3d printer extruder has been developed by using CREO 5.0. The model has been simulated using ANSYS software on fluent domain 15.0 workbench in order to observe various parameters effecting the temperature, pressure, wall shear stress of 3d printing extruder filament. Six types of configurations of extruder model have been used nozzle angle of 30, 60, 45, and 50 degree (validation) with nozzle diameter 0.1, 0.3 and 0.2mm (validation). An optimized model of 3d printer extruder has been developed as stated configurations of extruder model. The simulations have been performed at a different heat load i.e. 10, 20, 30 and 40W that is the heat load of heat source in extruder inbuilt inside it. The simulation of the optimized model gives lower value of wall shear stress, it is predicted that nozzle angle with 60 degree with nozzle diameter of 0.1mm exhibits minimum pressure and wall shear stress as compared to other optimized model of 3d printer extruder. The results are validated with reported existing experimental data.

Key Words

3D printer extruder, temperature, wall shear stress, pressure, bisphenol – a.

Cite This Article

"Effect of Nozzle angle and Nozzle Diameter in Performance of Extrusion in 3D Printer Liquefier", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 10, page no.b836-b841, October-2021, Available :http://www.jetir.org/papers/JETIR2110193.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Effect of Nozzle angle and Nozzle Diameter in Performance of Extrusion in 3D Printer Liquefier", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 10, page no. ppb836-b841, October-2021, Available at : http://www.jetir.org/papers/JETIR2110193.pdf

Publication Details

Published Paper ID: JETIR2110193
Registration ID: 315932
Published In: Volume 8 | Issue 10 | Year October-2021
DOI (Digital Object Identifier):
Page No: b836-b841
Country: BHOPAL, MADHYA PRADESH, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

000453

Print This Page

Current Call For Paper

Jetir RMS