• GAJULA CHALLAYAMMA SRAVANI
• M RAVINDRA

Today power system demand is increasing. In recent year’s power degraded at distribution side and Power loss is increasing at consumer side due to more uses of non-linear load. Power Quality issues created by sensitive load. In this paper MAF based UPQC device used to reduce voltage and current distortions. In this paper we use UPQC which consists of a series compensator and a shunt compensator and the PV cell is connected in between shunt and series connected voltage compensators. The compensator in series to a source is used to mitigate the voltage harmonics between the sources and loads. Whereas the shunt active filter is connected in parallel with the load is used to reduce and the harmonic currents produced by the load, reduce the total harmonic distortion (THD), extracting power from PV circuit, and increase the power factor of the system. The Synchronous reference frame based control is used in shunt and series compensators in UPQC. In this paper the power Quality can be improved by reduction of distortions leads to increase in efficiency of power system. The performance of MAF based UPQC is demonstrated by simulating the developed system design in MATLAB/Simulink under a Non-linear load.

Power Quality, shunt compensator, series compensator, UPQC, Solar PV,MPPT

"DESIGN AND PERFORMANCE ANALYSIS OF 3PHASE SOLAR PV INTEGRATED UPQC", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 12, page no.b174-b179, December-2021, Available :http://www.jetir.org/papers/JETIR2112122.pdf

"DESIGN AND PERFORMANCE ANALYSIS OF 3PHASE SOLAR PV INTEGRATED UPQC", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 12, page no. ppb174-b179, December-2021, Available at : http://www.jetir.org/papers/JETIR2112122.pdf