• MOHAMMED MOIZ Research Scholar
• Dr. Mohammed Ahmed Hussain

Conventional steel framed structure is a structure which is used for the purpose of industrial buildings, commercial complexes, ware houses, storage rooms for chemical products, car servicing centers, work shops, laboratories etc. Conventional frame building is commonly abbreviated as C.S.B. In this type of buildings combination of steel members such as hot rolled sections and cold formed sections are used as primary members and secondary members. In this research work two different unique models of steel building for the purpose of maintenance of an airbus A-380 have been designed by using two different design codes namely, Indian standard code of practice(IS:800-2007) and American institute of steel construction code of practice(AISC code). Analysis and design have been done to compare the quantity of steel that how much quantity is obtained through IS-code and how much quantity of steel is optimized with the help of AISC code. Therefore in this research work two unique model using staad-pro software have been designed by taking all three dimensions in to account. For designing the aircraft hangar for airbus A-380 zone-II has been identified and in zone –II place has been selected. Therefore this design has been performed by selecting Hyderabad place because in Hyderabad minimum wind speed of 44m/s is recorded. In this unique models firstly the dimensions have been finalized as 120m is the front elevation width of the hangar which is usually called as a span of the building and the length of the building is assumed as 115m along y-axis and a clear height of 30m is assumed by keeping in mind the dimensions of the air bus A-380. As the dimensions of airbus A-380 includes the length as 73m(239.5feets),wingspan width is 79.8m(261.8feets) and height 24.1m(79feets). In the airbus A-380 the minimum seating capacity of passengers are 555 members and a maximum capacity of 840 members.

conventional steel Building (CSB), Aircraft Hangar design, Air Bus A-380.

"COMPARATIVE ANALYSIS AND DESIGN OF AN AIRCRAFT HANGAR FOR AIR BUS A-380 AS A CONVENTIONAL STEEL FRAMED STRUCTURE BY USING AISC AND IS – CODE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 2, page no.a175-a191, February-2022, Available :http://www.jetir.org/papers/JETIR2202023.pdf

"COMPARATIVE ANALYSIS AND DESIGN OF AN AIRCRAFT HANGAR FOR AIR BUS A-380 AS A CONVENTIONAL STEEL FRAMED STRUCTURE BY USING AISC AND IS – CODE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 2, page no. ppa175-a191, February-2022, Available at : http://www.jetir.org/papers/JETIR2202023.pdf