• M.S.Phani kumar
• K.NagaMalleswararao
• M.Pavankumar
• N.Sarathkumar
• P.VenkataKiran,T.Nagasai,U.Sai

This experimental study is aimed to create a concrete mixer consisting which replaces the fine aggregate and coarse aggregate with demolition Waste. It is also used to analyze the effect of demolition concrete in terms of Workability addition of aggregates etc. after preparing the concrete block, the differences in weight between the original concrete and the demolition concrete block is also tested. The Demolition waste is mixed in definite proportions with the concrete. And then various tests are conducted for fresher concrete as well as hardened concrete. The Demolition waste in various percentage (10%,20%) for M25 mix to determine the compressive strength, flexural strength splitting tensile strength were determine and compression made with control concrete and durability of concrete and are compared for both grades and results are tabulated and the optimum percentages are concluded.

Demolition waste, Workability, Flexural strength, Compressive strength

"PARTIAL REPLACEMENT OF INGREDIENTS IN CONCRETE WITH DEMOLITION WASTE MATERIALS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 3, page no.f467-f471, March-2022, Available :http://www.jetir.org/papers/JETIR2203561.pdf

"PARTIAL REPLACEMENT OF INGREDIENTS IN CONCRETE WITH DEMOLITION WASTE MATERIALS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 3, page no. ppf467-f471, March-2022, Available at : http://www.jetir.org/papers/JETIR2203561.pdf