• JAFFARSADIK MULLA
• Farooque Mursal

Abstract BC 10% boron carbide and 5% molybdenum disulphate particles are used to strengthen aluminum (Al-2219). Stir casting is used to create aluminum alloy hybrid metal matrix composites (HMMCs) . Pin-on-disc equipment is used to perform dry sliding wear tests on pure base alloy Al-2219, mono, and hybrid composites at room temperature. Sliding speed, sliding distance, and applied stress were among the factors used to examine the wear behavior of composites. The outcome demonstrates that wear rate increases as load and sliding distance increase. Compared to monocomposite materials, hybrid composites have greater wear resistance. SEM was used to examine the worn-out surface.

"Dry sliding Wear Behavior Aluminum 2219 MMC reinforced with Boron carbide & Molybdenum disulphate", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 3, page no.g830-g838, March-2022, Available :http://www.jetir.org/papers/JETIR2203708.pdf

"Dry sliding Wear Behavior Aluminum 2219 MMC reinforced with Boron carbide & Molybdenum disulphate", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 3, page no. ppg830-g838, March-2022, Available at : http://www.jetir.org/papers/JETIR2203708.pdf