UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 9 Issue 4
April-2022
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR2204773


Registration ID:
401375

Page Number

h537-h540

Share This Article


Jetir RMS

Title

Using Additive Manufacturing Technique for Topological Optimization of JCB ARM

Abstract

The JCB arm is one of the vital components used for lifting of heavy materials. The mass reduction is one of the important criteria for improving design of components. The objective of current research is to reduce the mass of JCB arm using topology optimization technique of additive manufacturing. The JCB design is developed in Creo design software and FE simulation on arm is conducted using ANSYS software. With reduction of JCB arm mass, the equivalent stress increased by nearly 140MPa. There is slight reduction in deformation with topology optimized design of JCB arm. The topology optimized design of arm has .01mm lower deformation value as compared to generic design.

Key Words

JCB arm, FEA, Topological Optimization

Cite This Article

"Using Additive Manufacturing Technique for Topological Optimization of JCB ARM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 4, page no.h537-h540, April-2022, Available :http://www.jetir.org/papers/JETIR2204773.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Using Additive Manufacturing Technique for Topological Optimization of JCB ARM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 4, page no. pph537-h540, April-2022, Available at : http://www.jetir.org/papers/JETIR2204773.pdf

Publication Details

Published Paper ID: JETIR2204773
Registration ID: 401375
Published In: Volume 9 | Issue 4 | Year April-2022
DOI (Digital Object Identifier):
Page No: h537-h540
Country: -, -, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

000324

Print This Page

Current Call For Paper

Jetir RMS