• SHIVAM UPADHYAY
• VIJAY KUMAR SRIVASTAVA
• SHAILESH CHAURASIYA
• VARUN KUMAR
• DIVYANSH MALL

This paper presents the effect of slag addition on strength development and workability of fly ash/slag based geopolymer (FASLG) concrete cured at normal temperature. Class C fly ash with high ferrite (Fe) content was used as the primary material. The proportions of fly ash (FA) to slag (SL) are: 1 FA: 0 SL, 0.9 FA: 0.1 SL, 0.7 FA: 0.3 SL, and 0.5 FA: 0.5 SL. The workability and strength properties were determined by slump, vikat, and compressive strength tests. The result shows that the highest compressive strength was achieved by FASLG-3 concrete with 30% slag addition and exhibited a comparable strength to that normal concrete at 28 days.

Geopolymer concrete, slag, Fly Ash.

"A STUDY ON EFFECT OF ADDITION OF SLAG IN GEOPOLYMER CONCRETE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 5, page no.e86-e89, May-2022, Available :http://www.jetir.org/papers/JETIR2205512.pdf

"A STUDY ON EFFECT OF ADDITION OF SLAG IN GEOPOLYMER CONCRETE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 5, page no. ppe86-e89, May-2022, Available at : http://www.jetir.org/papers/JETIR2205512.pdf