• KIRAN KUMAR REDDY VADLAPALLY
• M. PRAVEEN KUMAR
• E. AKHIL GOUD
• G. NAVEEN REDDY
• V. KISHORE

– This paper explains the model of the project to correct the power factor using Automatic Compensators. Energy is very important in our contemporary world. Finding the reasons for power losses and increasing the stability of the power system is very important. The electricity market is growing rapidly due to increased load. The Electricity network feeds to a large array of electrical loads, power electronic devices, and agriculture load which provides a changing demand on the generating units. These leads to decrease in power factor of the load. Lower cos φ(Power Factor) leads to increased current flow and causes voltage drops. Due to this system becomes inefficient and monthly bill increases. Suitable capacitors depending upon the fluctuations of the load should automate and run without any human intervention. This can be engineered by using Automatic compensators which can improve power factor approximately equal to one(unity). In our load, there is Inductive load in maximum. This consumes apparent power which affects the Generating unit which in turn increases losses and decreases efficiency of the power system.

Power Factor Correction, Real Power, Reactive Power, Inductive Load, Power System Efficiency

"Economic Improvement of Power Factor Using Automatic Compensators for Domestic Use", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 5, page no.f853-f856, May-2022, Available :http://www.jetir.org/papers/JETIR2205700.pdf

"Economic Improvement of Power Factor Using Automatic Compensators for Domestic Use", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 5, page no. ppf853-f856, May-2022, Available at : http://www.jetir.org/papers/JETIR2205700.pdf