• Shubham Rahinj
• Sarika Lohar
• Tanaj Tamboli
• Prof. Sushma Bhosale

This function includes a smart and low-key door lock and a visible fingerprint connector. To implement this assignment, we will be using Atmel Atmega328p, fingerprint sensor, gsm module, motive motive power, engine and a few different hardware tools. The fingerprint sensor will be integrated inside the door panel, facing the outer part of the door, so that people cannot enter the control machine externally. The latches can be adjusted inside the door panel, so that the size of the door helps the strength of the latch. We will use some latch on the panel to separate the pressure between them when trying to apply pressure. The fingerprint sensor will pick up a human fingerprint and transfer it to a small controller to match its records. If the print fits one of the microcontroller reminder fingerprints, the small controller will lock or release the latch, based entirely on its modern world. If the fingerprints are overseas on a small controller, the buzzer will be noisy and one will have to try again. If the wrong fingerprints are tried five times in length, the machine will notify the owner to tell him or her about the site. The gadget can also go to a secure nation where it will end up thundering to let neighbors know something is wrong. The device may be reset immediately after installation of a known printer.

Fingerprints, Security, Automatic Items

"FINGERPRINT BASED DOOR LOCK SYSTEM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 5, page no.k469-k472, May-2022, Available :http://www.jetir.org/papers/JETIR2205B61.pdf

"FINGERPRINT BASED DOOR LOCK SYSTEM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 5, page no. ppk469-k472, May-2022, Available at : http://www.jetir.org/papers/JETIR2205B61.pdf