• Kushal M
• Manoj G
• Priyanak Kodad
• Yashaswini B
• Manjunatha B

Electricity metering and billing is a periodic process in our daily life, but also it has few disadvantages like each, and every meter must be read manually, trust issues on some meter readers and bill/meter tamper. To overcome this, here is a proposed idea where the consumed power is calculated within the meter and the data is sent to the electricity department and the customer. This system uses a Arduino, GSM module, and LCD. The Arduino is used to perform the power consumption calculation, sending the data through GSM module and write data to LCD display. The proposed system continuously monitors the amount of power consumed and then generates the total electricity bill of that month. The billing details is sent to the customer and displayed on the LCD display. If the payment is delayed it adds up the fine to the electricity bill. This system reduces manpower where each meter must be read and can be notified the customer at the correct time, which avoids penalty to the customer.

Energy meter, Power, Customer, Tamper, Payment.

" Smart Electricity Billing System", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 6, page no.f38-f41, June-2022, Available :http://www.jetir.org/papers/JETIR2206506.pdf

" Smart Electricity Billing System", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 6, page no. ppf38-f41, June-2022, Available at : http://www.jetir.org/papers/JETIR2206506.pdf