• Venkata Krishna atkuri
• G. V. Rama Rao

In ceramic industry, about 15%-30% waste material generated from the total production. This waste is not recycled in any form at present. However, the ceramic waste is durable, hard and highly resistant to biological, chemical, and physical degradation forces. A ceramic waste powder is also used as a binder with partial replacement of cement which takes some part of reaction at the time of hydration, and also it acts as a filler material. In this study, Performance of Ceramic waste concrete exposed to temperature attack was studied. For checking strength effect of replacement of cement by ceramic waste powder, the cement is replaced at 10%, 20%, 30%, 40% and 50%. For study of size effect of ceramic waste powder, the powder is divided in to two grades one is ceramic waste powder having size less than 90 micron and another is ceramic waste powder having particle size ranges from 90 micron to 150 microns. For this study, concrete mixtures were prepared, for low grade M20, medium grade M40 and high grade M60. For a better understanding the results obtained are compared with the results of conventional concrete and the variation is shown.

Conventional Concrete, Ceramic waste concrete, Ceramic Waste Powder, Temperature attack

"An Experimental Study on Ceramic waste Concrete Exposed to Temperature Attack", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 6, page no.g381-g388, June-2022, Available :http://www.jetir.org/papers/JETIR2206648.pdf

"An Experimental Study on Ceramic waste Concrete Exposed to Temperature Attack", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 6, page no. ppg381-g388, June-2022, Available at : http://www.jetir.org/papers/JETIR2206648.pdf