• Chandrakant Honrao

There are numerous factors that can lead to faults in electric power distribution systems, such as inclement weather, faulty insulation, auto accidents, etc. [9]. To increase service reliability when a failure occurs on the distribution network, the utility must locate the fault as soon as possible. The transmission line fault location is the main focus of the aforementioned study. The circuit analysis based on the symmetrical component is feasible due to the frequent operational balancing of transmission networks. It is important to note that the sequence component approach, which is a useful tool for circuit studies, only generates three independent sequence networks in the case of balanced systems. Because most distribution systems use a combination of single phase and three phase laterals and loads, it cannot be applied to the distribution system. Although a direct circuit analysis of a three-phase network is a possibility, the study's high complexity and difficulty have prevented it from being researched. This explains why there hasn't been much research.

Intelligent Fault Detection Technique in a Smart grid

"Intelligent Fault Detection Technique in a Smart grid with Non -Renewable Energy Source ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 7, page no.b499-b504, July-2022, Available :http://www.jetir.org/papers/JETIR2207160.pdf

"Intelligent Fault Detection Technique in a Smart grid with Non -Renewable Energy Source ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 7, page no. ppb499-b504, July-2022, Available at : http://www.jetir.org/papers/JETIR2207160.pdf