• Rayees Ahmad Gojri
• Ather UL Islam
• Mohit Tekwani
• Sankeerth B Y

The idea of electric brakes is novel and adaptable. Magnetic field and electric force are used to operate electromagnetic brakes. The Electromagnetic Braking system transmits the force necessary for braking automatically while using magnetic force to hold the brakes in place. It is obvious that the electromagnetic brake plays a significant role in the secure stopping of large vehicles. It seeks to lessen brake failure to prevent traffic collisions. Additionally, it lessens the need for brake system maintenance. This system's benefit is that it may be applied to any car with only minor transmission and electrical system modifications. The Electromagnetic Braking system transmits the force necessary for braking automatically while using magnetic force to hold the brakes in place. The shaft should be joined to the disc, and a frame-mounted electromagnet should be used. The magnetic field is increased everywhere when electricity is fed into a coil because of the flowing force that passes through the coil and draws weapons to the coil. As a result, the torque will increase and the car will finally become more relaxed. These brakes, which function as supplemental brakes, can be used on heavy trucks. Commercial cars that have magnetic fluctuations produced by current controllers can employ electric brakes. Future automobiles may use brakes that have undergone certain upgrades. Frequent collision brakes prevent the car's movement by converting the car's kinetic energy into heat. Removing the friction between the brake material and the brake area means that the life of these components will be greatly improved, which will reduce the cost to the consumer throughout the lifetime of his car and will reduce emissions. It can be proved in this study that the electromagnetic automatic brake is an effective delay device. The use and control of electric brakes may be combined with the design of vehicles and their brake collision system to obtain the appropriate matching of both operating systems in order to maximize safety while minimizing operating costs. This paper discusses the development of Automatic Braking System bases on sensor technology.

When an object comes in the range of sensor, it activates electromagnet. Electromagnet works on the Faradays law of Electromagnetic Induction. As a result, eddy currents are produced in the disc by Lenzs Law. As a result, the brake is applied.

"Design and Fabrication of Electromagnetic Automatic Braking System.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 7, page no.c547-c552, July-2022, Available :http://www.jetir.org/papers/JETIR2207267.pdf

"Design and Fabrication of Electromagnetic Automatic Braking System.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 7, page no. ppc547-c552, July-2022, Available at : http://www.jetir.org/papers/JETIR2207267.pdf