• RAJKUMAR DUHAN
• SAHIL

This paper includes microscopic and mechanical research on friction stir of greater polymers manufactured using friction stirring processing. Contact stir preparation (FSP) is a sturdy processing technology with unique features, including minimal heat generation, wide plastic flow, attainment of extremely fine micro in the stirred zone, and healing of defects and castings defects. FSP permits the customization of a structure's attributes at the local level. It is a technique for altering the material characteristics of surfaces by the stirring action of a tool moving across the contact of a substance whose mechanical properties must be adjusted. In this study, an effort was made to evaluate the improvement of the surface mechanical characteristics of metal matrix composites produced by stir casting. Carbides (SiC) and aluminates (Al2O3) with a particulate capacity of 200 m or a weight percentage of 5% were used as a hybrid hardening filler in metal matrix materials in the production of composites. On the face of the composites, FSP has been performed to refine and sizes of suggested composite materials. The grain size has been significantly reduced from 84 m to 7 m, as determined by microstructural experiments investigating grain size fluctuations. As process parameters, three distinct tool rotation rates and three distinct linear tool motions were investigated. From the testing results, the optimal process parameters for obtaining the suggested composite material's tiny grain size and enhanced hardness values, tensile characteristics, and wear properties were determined.

Resistance spot processes, metal MC, aluminum stir molding, frictional; weld;

"A REVIEW PAPER ON ALUMINIUM-BASED HYBRID COMPOSITE FABRICATED USING FRICTION STIR WELDING METHOD", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 11, page no.f613-f622, November-2022, Available :http://www.jetir.org/papers/JETIR2211578.pdf

"A REVIEW PAPER ON ALUMINIUM-BASED HYBRID COMPOSITE FABRICATED USING FRICTION STIR WELDING METHOD", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 11, page no. ppf613-f622, November-2022, Available at : http://www.jetir.org/papers/JETIR2211578.pdf