UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 9 Issue 12
December-2022
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR2212423


Registration ID:
506141

Page Number

e176-e181

Share This Article


Jetir RMS

Title

VARIATION IN MECHANICAL PROPERTIES OF WIRE DUE TO VARIATION OF SPEED IN WIRE DRAWING PROCESS

Abstract

The speed in cold wire drawing process become common requirement, because of increase in customer demands and production rate and it is vary essential to the effect of speed on the properties of the drawn wire. In this process the effect of high speed drawing (10m/s &30m/s) on mechanical and technological properties of high carbon steel wire has been investigated. Wire rod 5.50mm from steel grade 0.51% carbon and 0.65% carbon were drawn to 1.35mm in 13 draws and two speeds 10m/sec and 30m/sec. After each draw the following properties were recorded; tensile strength (Ts), temperature (T), number of twists (Nt), number of bends (Nb). Significant change has been observed in properties for final wires because of increased draw speed. However, there are other advantages like smooth wire surface is found after drawing at high speed as compared to low speed. The results were practically and statistically estimated.

Key Words

Wire drawing, drawing temperature, tensile strength, drawing speed

Cite This Article

"VARIATION IN MECHANICAL PROPERTIES OF WIRE DUE TO VARIATION OF SPEED IN WIRE DRAWING PROCESS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 12, page no.e176-e181, December-2022, Available :http://www.jetir.org/papers/JETIR2212423.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"VARIATION IN MECHANICAL PROPERTIES OF WIRE DUE TO VARIATION OF SPEED IN WIRE DRAWING PROCESS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 12, page no. ppe176-e181, December-2022, Available at : http://www.jetir.org/papers/JETIR2212423.pdf

Publication Details

Published Paper ID: JETIR2212423
Registration ID: 506141
Published In: Volume 9 | Issue 12 | Year December-2022
DOI (Digital Object Identifier): http://doi.one/10.1729/Journal.32571
Page No: e176-e181
Country: INDORE, MP, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

000157

Print This Page

Current Call For Paper

Jetir RMS