• MD JAVED ANSARI
• Prof. RAJESH JOSHI

The cement industry is one of the main producers of carbon dioxide (CO2).for production of one ton of cement approximately one ton of CO2 is released into the atmosphere. To reduce the cement content different supplementary Cementitious materials (SCM’s) like fly ash, silica fume, alccofine, metakaolin, rice husk ash, ground granulated blast furnace slag were used. To prevent exhaustion of natural resources such as natural stone, natural sand etc. an attempt is made to replace the natural materials by using waste crushed material along with Alccofine powder and Ground granulated blast furnace slag (GGBS) as well as Polypropylene Fiber .By using the waste and chemical compound with different proportions along with cement and with proper water cement ratio the suitability and performance of the above said materials is measured in this project.

Alccofine, Compressive strength (CS), Flexural Strength (FS), Polypropylene Fiber (PPF)

"A LITERATURE REVIEW ON STUDY OF ALCCOFINATED CONCRETE INCORPORATED WITH POLYPROPYLENE FIBER AS PARTIAL REPLACEMENT OF CEMENT IN CONVENTIONAL CONCRETE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.10, Issue 6, page no.k376-k378, June-2023, Available :http://www.jetir.org/papers/JETIR2306A46.pdf

"A LITERATURE REVIEW ON STUDY OF ALCCOFINATED CONCRETE INCORPORATED WITH POLYPROPYLENE FIBER AS PARTIAL REPLACEMENT OF CEMENT IN CONVENTIONAL CONCRETE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.10, Issue 6, page no. ppk376-k378, June-2023, Available at : http://www.jetir.org/papers/JETIR2306A46.pdf