• Bharath S
• SreAdethya V
• Ashwin K
• Swathi M
• AravinthanRaju E

Self compacting concrete (SCC) gained wide use for the placement in the congested reinforced structure with difficulty in casting condition. For, such applications fresh concrete must possess high fluidity and good cohesiveness. One alternative to reduce the cost of self compacting concrete is by adding mineral admixture such as super plasticizer and Viscosity Modifying Agents replacement cement by 0%, 5%, 10%, 15% and 20% . Moreover, by the addition of mineral admixture in the manufacturing of self compacting concrete not only it reduces the cost but also reduces the heat of hydration, also parameters like environmental consciousness, sustainable development plays important role in future. So keeping that in mind the research is made with partial replacement of foundry sand with fine aggregate by 50%. Knowing that concrete is weak in tension, Glass fibers are added by 1% to improve the tensile property. The initial results of experimental programs aimed at producing and evaluating SCC made with Glass fibers are presented and discussed. The mix design of SCC was arrived as per guidelines of European Federations of National Associations Representing for Concrete (EFRNAC).Based on the results obtained from the comparison study of SCC with the results have concluded that the use of Super Plasticizer and Viscosity Modifying Agents increases the early age strength of the concerte.

"EXPERIMENTAL INVESTIGATION ON RHEOLOGICAL AND HARDENED PROPERTIES OF SCC WITH PARTIAL REPLACEMENT OF STEEL SLAG AGGREGATES", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.10, Issue 6, page no.k440-k449, June-2023, Available :http://www.jetir.org/papers/JETIR2306A54.pdf

"EXPERIMENTAL INVESTIGATION ON RHEOLOGICAL AND HARDENED PROPERTIES OF SCC WITH PARTIAL REPLACEMENT OF STEEL SLAG AGGREGATES", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.10, Issue 6, page no. ppk440-k449, June-2023, Available at : http://www.jetir.org/papers/JETIR2306A54.pdf