• Prital Kalasur
• Shrinath Pawar
• Kumar Kunte
• Niraj Sakhale
• Vaishnavi Kadam,Kunal Pawar,Devesh Naikare

This project aimed to investigate the performance of steel and glass fibers in structural applications of fiber-reinforced concrete (FRC). The focus was on evaluating the effect of fiber type and content on the compressive strength and economic aspects of the FRC mix. FRC specimens were prepared with steel and glass fibers at specific dosages and aspect ratios. Compressive tests were conducted to assess the strength properties of the FRC, and the results were compared to those of plain M30 concrete and steel/glass fiber reinforced concrete. A total of 36 cubes were cast, with 12 cubes for each type of concrete. The cubes underwent 7-day,14-Day, and 28-day curing, and the test results were analyzed. The findings revealed that the addition of fibers significantly enhanced the mechanical properties of the concrete. Steel fibers had the most significant impact on compressive strength, while glass fibers positively influenced both compressive strength and crack resistance. Additionally, the use of FRC resulted in reduced crack width and increased energy absorption capacity. Overall, this project demonstrates the potential of FRC as a viable material for structural applications, especially in areas subjected to high loads and dynamic stresses. The findings contribute valuable insights for optimizing the design and utilization of FRC in various engineering applications.

"“ENHANCING CONCRETE PERFORMANCE INCORPORATING STEEL AND GLASS FIBERS WITH FLYASH REPLACEMENT AND ASSESSING ECONOMIC VIABILITY’’", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.10, Issue 7, page no.e737-e745, July-2023, Available :http://www.jetir.org/papers/JETIR2307478.pdf

"“ENHANCING CONCRETE PERFORMANCE INCORPORATING STEEL AND GLASS FIBERS WITH FLYASH REPLACEMENT AND ASSESSING ECONOMIC VIABILITY’’", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.10, Issue 7, page no. ppe737-e745, July-2023, Available at : http://www.jetir.org/papers/JETIR2307478.pdf