• Subhankar Biswas
• Thia Paul

Activated Flux Tungsten Inert Gas Welding is one of the strategies for enhancing penetration functionality of autogenously TIG welding. The floor energetic flux improves penetration of weld which helps to limit the range of passes in weld, an integral requirement for any distinctive weldments. This is done by using utility of flux, firstly in the shape of powder which is transformed into paste and unfold over the location to be welded earlier than beginning the autogenous TIG welding process. The greater temperature in the arc melts the flux which will increase weld depth due to the fact of floor anxiety pushed pressure and constriction of the arc. The goal of contemporary work is to check out the weldability of a comparable aggregate of SS 308 and an accountable depth improving mechanism the use of exclusive aspect oxide fluxes. A-TIG welding method with TWO extraordinary fluxes; TiO2 and SiO2 with acetone as a service solvent was once carried out on a comparable mixture of 4mm thick SS 308 Plate in single ignore for current investigation.

"Activated Flux TIG Welding Of Similar Materials Stainless Steel 308", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.10, Issue 12, page no.f5-f8, December-2023, Available :http://www.jetir.org/papers/JETIR2312502.pdf

"Activated Flux TIG Welding Of Similar Materials Stainless Steel 308", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.10, Issue 12, page no. ppf5-f8, December-2023, Available at : http://www.jetir.org/papers/JETIR2312502.pdf