• Prof.Nidhi Sarnobat
• Prof.Sunil Umachagi

Plastic is the most commonly used by everyone in the world. Plastic waste becomes a major hazardous effect on environment as it is not easily biodegradable. Every year the use of plastic increases similarly so does its waste. Plastic like high density polyethylene (HDPE) and plastic below 50 microns cause major problems. National environment tells that 7.70 million tons of plastic waste was generated in 2017.In this study we have used ecofriendly plastic reducer to make building materials, Collected plastic of 15 Kg sample from Hubli Dharwad region, Out of which we have replaced 15%, 25%, 45%, 60% and 70% in which at the replacement of 60% we have achieved maximum Compression strength of 2.58N/mm2 .Collected plastic of 5 Kg sample from Hubli Dharwad region, Out of which we have replaced 25%, 30%, 20%, 10% and 5% in which at the replacement of 60% we have achieved maximum Compression strength of 2.58N/mm2 .The maximum Compression Strength is achieved for the proportion,60% waste plastic+ 15% Quarry Dust+ 15% Baggasse+ 10% Rice husk Ash. The obtained value of Compression test value is 2.58N/mm2.The maximum Water Absorption test is achieved for the proportion, 60% waste plastic+ 15% Quarry Dust+ 15% Baggasse+ 10% Rice husk Ash. The obtained value of Water Absorption is 0.20%

Eco-Friendly Building Materials, Eco-Friendly Plastic Reducer

"“A NEW PATHWAY TO SUSTAINALBE DEVELOPMENT OF ECO - FRIENDLY BUILDING MATERIALS”.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.10, Issue 12, page no.f284-f286, December-2023, Available :http://www.jetir.org/papers/JETIR2312532.pdf

"“A NEW PATHWAY TO SUSTAINALBE DEVELOPMENT OF ECO - FRIENDLY BUILDING MATERIALS”.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.10, Issue 12, page no. ppf284-f286, December-2023, Available at : http://www.jetir.org/papers/JETIR2312532.pdf