• CH. Siva Kumar
• M V Ramana Rao

A six-step discontinuous current mode inverter interfaced with a Permanent Magnet Synchronous Motor drive was modelled using MATLAB/Simulink in this work. Ins this work the dq-axis Voltage-Current and Torque relations are model in terms of machine parameters. It makes use of MATLAB/Simulink's gate drive capabilities and a six-step 120-degree mode inverter. The model makes it simple to modify the gate drive inverter and machine characteristics. Changes in power supply information, phase angle advance, and PMSM parameters like, machine stator resistance, machine inductance, number of poles of the machine, constants of rotor magnets, moment of inertia, and lastly the damping constant of the machine. Testing for a phase angle advance of 30° and 45° using a six-step discontinuous current mode inverter supplied PMSM drive under no-load circumstances is part of the simulation study

"Simulation Study of a Six-Step Discontinuous Current Mode Inverter Fed Permanent Magnet Synchronous Motor: An Interactive Modeling Approach ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 2, page no.e126-e131, February-2024, Available :http://www.jetir.org/papers/JETIR2402416.pdf

"Simulation Study of a Six-Step Discontinuous Current Mode Inverter Fed Permanent Magnet Synchronous Motor: An Interactive Modeling Approach ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 2, page no. ppe126-e131, February-2024, Available at : http://www.jetir.org/papers/JETIR2402416.pdf