• Prof.Sunil Umachagi
• Anjani Achyut Joshi
• Chetak Balakrishna Shinge
• Prerana Raju Sonone
• Tejashwini Suresh Waddavet

Treatment of industrial wastewater for meeting the effluent discharge standards is a challenging task. Electrochemical methods, especially electro coagulation (EC) process received great attention due to its ability to treat various industrial wastewaters at a lesser cost. The COD removal efficiencies of the EC process are above 80% for almost all industrial wastewater. Also, the energy requirement for the EC process is very less compared to other removal processes. Moreover, the sludge generated from the EC process can be safely disposed by adopting different methods. The study was experimentally investigated taking into account various factors such as pH (3–7.5), solar power (2v-6v) and distance between the electrodes (2–5 cm), electrolysis time (60 min). Maximum Chemical Oxygen Demand (COD) removal efficiency was 85% and Turbidity observed for the treated wastewater was 9 NTU. Aluminum (Al) electrodes and Titanium dioxide (Nano particle) were used.

Solar Power, Nano Particle [TiO2], Paint Industry Wastewater, Electro coagulation Technology.

"EXPERIMENTAL INVESTIGATION ON EFFECTIVENESS OF NANO PARTICLE IN ELECTROCOAGULATION TECHNOLOGY FOR THE TREATMENT OF PAINT INDUSTRY WASTEWATER", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 4, page no.d145-d147, April-2024, Available :http://www.jetir.org/papers/JETIR2404323.pdf

"EXPERIMENTAL INVESTIGATION ON EFFECTIVENESS OF NANO PARTICLE IN ELECTROCOAGULATION TECHNOLOGY FOR THE TREATMENT OF PAINT INDUSTRY WASTEWATER", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 4, page no. ppd145-d147, April-2024, Available at : http://www.jetir.org/papers/JETIR2404323.pdf