• J.MOHAMMED FEROS KHAN
• A.Mohanasundaram
• K.Rameez Raja
• A.Anwar Basha

The main aim of this paper is to design and construct a voice operated lift/elevator control system. In this project Arduino programming is used for voice recognition module is used for detecting the floor and stopping the motor rotation. The Single phaseinduction ACmotor (230V,6A) is used for controlling the lift. The microcontroller (ATmega 328) in the arduino is programmed. The voice recognition system which is the input module to the microcontroller takes the voice instructions given by the user as input and the controller judges the instruction. The two channel relay (5V,10A) is connected with contactor (230V,10A) which is used to control the induction motor (single phase 230V,50HZ,6A) The lift upwards or to the downwards, and according to the users voice the switching mechanism controls.

ARDUINOUNO, Relay, Voice recognition

"VOICE CONTROLLED LIFT SERVICE FOR DISABLED PERSON", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 4, page no.g427-g430, April-2024, Available :http://www.jetir.org/papers/JETIR2404657.pdf

"VOICE CONTROLLED LIFT SERVICE FOR DISABLED PERSON", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 4, page no. ppg427-g430, April-2024, Available at : http://www.jetir.org/papers/JETIR2404657.pdf